CUMMINS CELECT INJECTORS NOW AVAILABLE WITH PRODIESEL

Have you been looking for Cummins Celect Injectors?

Well look no further.
We have them in stock and are making more.

Here is a list and cross-reference of the part numbers available.

ProDiesel Part #	OEM Cross References
4061851R	4061851
3081316R	3081316
3081319R	3081319, CPL 1609, CPL 1644
3411752R	3084589, 3087557, 3087557PX, 3087557RX, 3411752, EX637557, CPL 1855, CPL 1875, CPL 1885, CPL 1856, CPL 1857, CPL 1973, CPL 2178, CPL 2370, CPL 2371, CPL 2036, CPL 2037
3411753R	3087734, 3095040, 309504RX, 3411753, 3411753PX, 3411753RX, EX631753, CPL 2036, CPL 2037, CPL 2178, CPL 2370, CPL 2371
3411754R	3411754, 3087772, 3411754RX, CPL 2012, CPL 2040, CPL 2041, CPL 2042, CPL 2099, CPL 2204, CPL 2445, CPL 2539, CPL 2540, CPL 2541, CPL 2542, CPL 2543, CPL 2809, CPL 2811, CPL 2812
3411755R	3411755, 198681D, 3095731
3411756R	3083849, 3609922, 3411756, 3411756PX, 3411756RX, EX631756, CPL 2199, CPL 2200, CPL 2350, CPL 2477, CPL 2562, CPL 2563, CPL 2607, CPL 2608, CPL 2610, CPL 2611, CPL 2612, CPL 2614, CPL 2615, CPL 2828
3411758R	3411401, 3411758, 3411758PX, 3411758R, 3411758RX, EX631758, CPL 2201, CPL 2425
3411759R	3083846, 3087733, 3087560, 3087560PX, 3087560RX, 3411759, 3411759RX, EX637560, CPL 1807
3411760R	3411760, 3083848, 3087558, 3087807, 3411760, 3411760PX, 3411760RX, EX631760, CPL 1809, CPL 1844, CPL 2026, CPL 2306, CPL 2492
3411761R	3087807, 3411761, 3411761RX, 3609796, EX631761, CPL 2027
3411762R	3409975, 3411762RX, 3411762, CPL 2398
3411763R	3087556, 3087788, 3095086, 3411762, 3609796, 3411763, 3411763PX, 3411763RX, EX631763, CPL 2003, CPL 2025
3411764R	3088178, 3411764, 3411764PX, 3411764RX, EX631764, CPL 2143, CPL 2261, CPL 2403, CPL 2659, CPL 9921, CPL 9925, CPL 9951
3411765R	3080931, 3411765, 3411765PX, 3411765R, 3411381, 209992X, CPL 2590, CPL 2389
3411766R	3409975, 3411691, 3411766, 3411766PX, 3411766R, 3411766RX, EX631766, CPL 2390, CPL 2591
3411767R	3083662, 3411385, 3411767, 3411767RX, EX631767, CPL 2391, CPL 2592
3411845R	3411845, CPL 2443, CPL 2817
3652516R	3652516, 3070551, 3071534, 3076029, 3081317, 3652516RX, CPL 1348, CPL 1357, CPL 1367, CPL 1375, CPL 1420, CPL 1428, CPL 1511, CPL 1512, CPL 1513, CPL 1514,
3652540R	3652540, 3081318, 3073996, 3652540RX, CPL 1587, CPL 1588, CPL 1589, CPL 1590, CPL 1617, CPL 1642, CPL 1669, CPL 1983, CPL 1984, CPL 2066, CPL 2067
3652541R	3652541, 3070739, 3073995, 3081314, 3081315, 3652542, EX632542, CPL 1324, CPL 1384, CPL 1385, CPL 1386, CPL 1389, CPL 1390, CPL 1391, CPL 1393, CPL 1394, CPL 1426, CPL 1445, CPL 1533, CPL 1534, CPL 1535, CPL 1536, CPL 1537, CPL 1538, CPL 1540, CPL 1548
3652542R	3652542, 3073995, 3081315, 3652542PX, 3652542RX, EX632542,, CPL 1572, CPL 1573, CPL 1574, CPL 1575, CPL 1583, CPL 1649, CPL 1831, CPL 1944, CPL 1580
4026222R	4026222, FS4026222RX, CPL2828
4902921R	4902921, 4088384, 4902921PX, 4902921RX, 4902921NX
4902925R	4902925, 19511728D
4903084R	4903084, FS4903084PX
4903319R	4903319, FS4903319PX
4903472R	4903472, FS4903472PX
4928171R	4928171, DCI4954434, FS4928171RX

PLEASE READ BEFORE INSTALLING YOUR NEW CUMMINS CELECT ELECTRONIC INJECTOR

Injector hold-down clamps torque for N14 @ 30 Ft Lbs., L10 & M11 @ 55 Ft Lbs.
Celect injector nozzles can be easily damaged when contacted against any hard surface. Any tip damage (dings, dents, etc.) which causes spray hole deformation may lead to cracks and/or blown nozzles. Please use caution whenever handling or installing Celect injectors to ensure that no damage occurs
When replacing Celect injectors always remove battery cables for a minimum of five minutes to allow the computer to reset.
After installation allow the engine to run for 50 miles to allow the computer to recalibrate to the new injector.
Never replace an injector for a misfire unless it fails TWO SUCCESSIVE Compulink Automatic Cylinder Performance Tests.
Never replace an injector for rough idle or a misfire complaint if there is not a low power complaint.
Never replace an injector without referring to the OEM CELECT Troubleshooting Procedures.
Never replace an injector if the complaint cannot be verified.
Never replace injectors in full sets without a specific identified cause.
Check fuel inlet restriction on all low power complaints BEFORE any other diagnostic work.
Never replace injectors at the same time other components are replaced.
When it is necessary to replace 2 or more injectors to correct rough idle/misfire, ALWAYS check the filters and tanks for water presence. Drain water before restarting.
Never replace an injector for 5% or less lube oil fuel dilution.
Always use fluorescent dye or the air pressure test when troubleshooting lube oil fuel dilution. Refer to OEM Service Parts Topic 91T6-12 for leakage limits and reject criteria.
Never replace a full set of injectors for fuel dilution of the lube oil.
Never replace an injector for external O-rings leaking fuel. Replace the O-rings.
Never replace an injector for any fault code if the injector solenoid checks ok.
Never replace an injector with a faulty or broken pigtail/connector. Replace the pigtail.
Never turn or adjust the Solenoid/Control Valve. Warranty is void if seal is broken.